A New Sodium Metal Fuel Cell Could Help Clean up Transportation

by Casey Crownhart (MIT Technology Review) Fuel cells powered with the metal could provide a new source of electric power that's far more energy-dense than lithium-ion batteries. -- A new type of fuel cell that runs on sodium metal could one day help clean up sectors where it’s difficult to replace fossil fuels, like rail, regional aviation, and short-distance shipping. The device represents a departure from technologies like lithium-based batteries and is more similar conceptually to hydrogen fuel cell systems.

The sodium-air fuel cell was designed by a team led by Yet-Ming Chiang, a professor of materials science and engineering at MIT. It has a higher energy density than lithium-ion batteries and doesn’t require the super-cold temperatures or high pressures that hydrogen does, making it potentially more practical for transport. “I’m interested in sodium metal as an energy carrier of the future,” Chiang says.

The device’s design, published today in Joule, is related to the technology behind one of Chiang’s companies, Form Energy, which is building iron-air batteries for large energy storage installations like those that could help store wind and solar power on the grid. Form’s batteries rely on water, iron, and air.

Chiang and his colleagues set out to build a fuel cell that runs on liquid sodium, which could have a much higher energy density than existing commercial technologies, so it would be small and light enough to be used for things like regional airplanes or short-distance shipping.

The research team built small test cells to try out the concept and ran them to show that they could use the sodium-metal-based system to generate electricity. Since sodium becomes liquid at about 98 °C (208 °F), the cells operated at moderate temperatures of between 110 °C and 130 °C (or 230 °F and 266°F), which could be practical for use on planes or ships, Chiang says.

From their work with these experimental devices, the researchers estimated that the energy density was about 1,200 watt-hours per kilogram (Wh/kg). That’s much higher than what commercial lithium-ion batteries can reach today (around 300 Wh/kg). Hydrogen fuel cells can achieve high energy density, but that requires the hydrogen to be stored at high pressures and often ultra-low temperatures.

“One of the critical issues with this type of cell concept is the safety issue,” Janek says. Sodium metal reacts very strongly with water.

Asked about this issue, Chiang says the design of the cell ensures that water produced during reactions is continuously removed, so there’s not enough around to fuel harmful reactions. The solid electrolyte, a ceramic material, also helps prevent reactions between water and sodium, Chiang adds.

Another question is what happens to one of the cell’s products, sodium hydroxide. Commonly known as lye, it's an industrial chemical, used in products like liquid drain-cleaning solution. One of the researchers’ suggestions is to dilute the product and release it into the atmosphere or ocean, where it would react with carbon dioxide, capturing it in a stable form and preventing it from contributing to global warming. There are groups pursuing field trials using this exact chemical for ocean-based carbon removal, though some have been met with controversy. The researchers also laid out the potential for a closed system, where the chemical could be collected and sold as a by-product.

There are economic factors working in favor of sodium-based systems, though it would take some work to build up the necessary supply chains. Today, sodium metal isn’t produced at very high volumes. However, it can be made from sodium chloride (table salt), which is incredibly cheap.

Chiang has cofounded a company called Propel Aero to commercialize the research. READ MORE